Product Class: Other

SNAP-Capture Magnetic Beads

Product Introduction

The SNAP-Capture Magnetic Beads are used to selectively immobilize and magnetically separate a SNAP-tag fusion protein from solution using magnetic agarose beads.  They are prepared by the coupling of SNAP-tag® substrate benzylguanine with highly stable 20-100 µm superparamagnetic particles.

  • These beads show a low non-specific absorption of proteins from a complex lysate
  • They are suitable for pull down applications
Catalog # Size Concentration
S9145S 2.0 ml

Product Information

Description

Two ml of SNAP-Capture Magnetic Beads is sufficient to perform 25 immobilization assays using 80 µl of bead suspension per assay.

The SNAP-tag is a novel tool for protein research, allowing the specific, covalent attachment of virtually any molecule or modified surface to a protein of interest. The SNAP-tag is a protein based on mammalian O6-alkylguanine-DNA-alkyltransferase (AGT).  SNAP-tag substrates are derivatives of benzyl purines and benzyl pyrimidines.  In the immobilization reaction, the SNAP-tag is covalently attached to the substituted benzyl group of the SNAP-Capture Magnetic Beads.

There are two steps to using this system: sub-cloning and expression of the protein of interest as a SNAP-tag fusion, and capture and immobilization of the fusion protein using SNAP-Capture Magnetic Beads.

For larger volume requirements, customized and bulk packaging is available by purchasing through the OEM/Bulks department at NEB. Please contact [email protected] for further information.

Figure 1: Substrate structure on SNAP-Capture Magnetic Beads 
Figure 1: Substrate structure on SNAP-Capture Magnetic Beads

This product is related to the following categories:
Snap Capture Products,
Proteome Analysis Products,
Protein Labeling Products,
This product can be used in the following applications:
Pull Down Assays,
Protein Labeling Snap Clip,
Cell Imaging

Reagents Supplied

Reagents Supplied

The following reagents are supplied with this product:

NEB # Component Name Component # Stored at (°C) Amount Concentration

Properties & Usage

Materials Required but not Supplied

  • Protein sample containing the protein to immobilize expressed as a SNAP-tag fusion 
  • Magnetic particle separator 
  • Buffer for immobilization and washing

Binding Capacity

SNAP-Capture Magnetic Beads (20 µl) were equilibrated and incubated with 500 µl of crude extract from E. coli containing a plasmid that expresses a SNAP-intein-chitin binding domain fusion protein for 1 hour at 25°C, then washed and the SNAP-intein-CBD fusion cleaved and eluted. Binding capacity was determined to be ≥1 mg of target protein per ml of bed volume.

Product Notes

  1. Storage of Magnetic Beads: Do notfreeze the SNAP-Capture Magnetic Beads. Store the unused beads at 4°C. With properstorage, beads should be stable for at least two years.
  2. Correct storage and handling of SNAP-tag fusion proteins is essential tomaintain reactivity of the SNAP-tag prior to immobilization.
  3. SNAP-tag fusion proteins can be purified before immobilization, but theimmobilization reaction also works in non-purified protein solutions includingcell lysates. 
  4. Add 1 mM DTT to buffers used for the storage of SNAP-tag fusion proteins.Protein samples should be stored at -20°C, or at -80°C for long-term storage.Handling at temperatures above 0°C should be minimized by thawing the SNAP-tagprotein samples shortly before use, and keeping them on ice until just beforethe immobilization.
  5. If a particular fusion protein requires buffers without reducing agents,minimize handling steps of the protein above 4°C before the labeling reaction.
  6. The SNAP-tag itself is tolerant of a wide range of buffers. The requirements ofyour fusion partner should dictate the selection of the buffer. The followingstorage buffer composition is recommended, especially when freezing proteinmaterial: pH between 7.0 and 8.0, monovalent salts (e.g. sodium chloride)between 50 mM and 250 mM, and at least 1 mM DTT. Non-ionic detergents can beadded if required, but ionic detergents should be avoided because they reducethe activity of the SNAP-tag. Many proteins benefit from the addition ofglycerol for frozen storage, typically 20% v/v.
  7. Immobilized SNAP-tag fusion proteins should be stored at 4°C. Sodium azide maybe added to 2 mM final concentration to prevent bacterial growth. Depending onthe stability of the fusion partner, under these conditions the immobilizedprotein should be stable at 2–6°C for several months. The SNAP-Capture MagneticBeads should not be frozen.
  8. The SNAP-tag fusion protein is linked to the SNAP-Capture Magnetic Beads by acovalent bond. Therefore the immobilized protein is essentially irreversiblybound to the beads. It is important however to preserve the functional stabilityof the protein fused to the SNAP-tag as much as possible. We recommend handlingthe immobilized fusion protein and storing between use at 4°C, to prepare itjust before use, and to handle it as gently as possible.

Protocols, Manuals & Usage

Protocols

  1. Use SNAP-Capture Magnetic Beads (S9145)

Tools & Resources

Selection Charts

FAQs & Troubleshooting

FAQs

  1. Cellular Imaging and Analysis FAQs

Troubleshooting

Quality, Safety & Legal

Quality Assurance Statement

Quality Control tests are performed on each new lot of NEB product to meet the specifications designated for it. Specifications and individual lot data from the tests that are performed for this particular product can be found and downloaded on the Product Specification Sheet, Certificate of Analysis, data card or product manual. Further information regarding NEB product quality can be found here.

Specifications

The Specification sheet is a document that includes the storage temperature, shelf life and the specifications designated for the product. The following file naming structure is used to name these document files: [Product Number]_[Size]_[Version]

Certificate Of Analysis

The Certificate of Analysis (COA) is a signed document that includes the storage temperature, expiration date and quality controls for an individual lot. The following file naming structure is used to name these document files: [Product Number]_[Size]_[Version]_[Lot Number]

Safety DataSheets

The following is a list of Safety Data Sheet (SDS) that apply to this product to help you use it safely.

Legal and Disclaimers

Products and content are covered by one or more patents, trademarks and/or copyrights owned or controlled by New England Biolabs, Inc (NEB). The use of trademark symbols does not necessarily indicate that the name is trademarked in the country where it is being read; it indicates where the content was originally developed. The use of this product may require the buyer to obtain additional third-party intellectual property rights for certain applications. For more information, please email [email protected].

This product is intended for research purposes only. This product is not intended to be used for therapeutic or diagnostic purposes in humans or animals.

New England Biolabs (NEB) is committed to practicing ethical science – we believe it is our job as researchers to ask the important questions that when answered will help preserve our quality of life and the world that we live in. However, this research should always be done in safe and ethical manner. Learn more.

Licenses

Notice To Buyer/User: The Buyer/User has a non-exclusive license to use this system or any component thereof for RESEARCH AND DEVELOPMENT PURPOSES ONLY. Commercial use of this system or any components thereof requires a license from New England Biolabs, Inc., 240 County Road, Ipswich, MA 01938.

Cellular Imaging and Analysis (i.e., SNAP and CLIP products)

Notice to Buyer/User: The Buyer/User has a non-exclusive license to use this system or any component thereof for RESEARCH AND DEVELOPMENT ONLY. Commercial use of this system or any components thereof requires a license from New England Biolabs, Inc., 240 County Road, Ipswich, MA 01938.

These patents and patent applications are owned by Covalys, or owned by the Ecole Polytechnique Fédérale de Lausanne (EPFL) and exclusively licensed to Covalys and NEB.

The products and/or their use may be covered by one or more of the following patents and patent applications:
Methods for Using O6-Alkylguanine-DNA-Alkyltransferases: US 7,939,284; US 8,367,361; EP 1 410 023; EP 2 037 271; EP 1 696 234; EP 2 211 177; JP 4195815; JP 4226053; CN 1295510; CN 1975422; and SG 100125.

Substrates for O6-Alkylguanine-DNA Alkyltransferase: US 7,799,524; and JP 4976651.

Mutants of O6-Alkylguanine-DNA-Alkyltransferases: US 7,888,090. EP 1720981 (pending).

Specific Substrates for O6-Alkylguanine-DNA-Alkyltransferases: US 8,163,479. EP 1730298 (pending).